![]() ![]() The base wire is connected to the P type layer. ![]() In an NPN transistor we have two layers of N Type material and one layer of P type. Inside the transistor we have the collector pin and the emitter pin between these. We can sandwich these together to form an NPN or a PNP transistor. We combine these materials to form the PN junction. Pure Silicon has almost no free electrons, so what engineers do is dope the Silicon with a small amount of another material which changes its electrical properties. So do check the manufacturer’s datasheet. However, not all transistors use this configuration. Typically with these resin body type transistors with the flat edge, the left pin is the emitter, the middle is the base, and the right side is the collector. This stands for the emitter, the base and the collector. Now, with a transistor we have three pins labelled E, B and C. The two transistors look nearly identical, so we need to cheque the part number to tell which is which. We have two main types of bipolar transistors, the NPN and the PNP type. Scroll to the bottom to watch the YouTube tutorial. What is the difference between an NPN and a PNP transistor. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |